Phenolic Core with ABS Edging

Home | Phenolic Core with ABS Edging

With AMPCO by AJW’s PVC/ABS edge tape, you can color-match your component edging with the corresponding surface. The tape is structurally bonded to the Phenolic Core material. Choose from an array of colors and patterns to enhance your overall design aesthetic. Apart from simply being pleasing to the eye, the tape provides superior edge protection. Solid Phenolic Core toilet partition material and PVC/ABS edge tape provide the best value for your system and specifications.

Material Characteristics:

• Good machinability
• Best Value
• Lightweight
• Heat and wear resistant
• Resists corrosion and chemicals
• Good mechanical strength & dimensional stability
• Low moisture absorption
• Virtually indestructible core
• Recommended for high traffic and high humidity

Strengths:

  • Durable Material
  • Good Moisture Resistance
  • Extensive Color Selection

Construction Features:

  • 3/4” (19mm) thick pilasters and doors
  • 1/2” (12mm) thick panels and screens
  • Heavy duty cast Stainless Steel door hardware and stamped Stainless Steel bracket hardware
  • Polished and eased pattern match or contrasting color
  • Class B fire rating
  • the following construction styles available for this material:  Overhead Braced (OHB), Floor Mounted (FM), Floor to Ceiling (F/C), Ceiling Hung (C/H), and Euroline.
  • standard hardware:  Stainless Steel Hardware, Wrap Around Vault Type Hinges, Two brackets per connection, Stainless Steel Shoes.

Optional Features:

  • Continuous Stainless Steel hinge or three hinges per door
  • Continuous Aluminum Spring Loaded Hinges
  • Continuous Stainless Steel or aluminum wall brackets
  • Euroline™ hardware
  • Class A fire rating
  • 1” Doors, ¾” Panels & Screens
  • ABS edging (1mm)
  • Surface mount stainless steel hinges (two or three per door)
  • No sightline Hardware (Cont. Aluminum Keepers and Cont. Hinges)
  • Extra high doors and panels (contact factory for limitations)

LEED:

  • RECYCLED CONTENT MR 4.0
    • Formica- Pre-consumer 5% Post-consumer 7%
    • Wilsonart- Pre-consumer 0% Post-consumer 24%
  • LOCAL AND REGIONAL MATERIALS MR 5.0 (Manufactured in Miami, FL)
    • Phenolic Recovery- Asheville, NC(W); Temple, TX(W); Bakersfield, CA(F); Atlanta, GA(F)
    • Hardware Recovery- Comfort, TX
    • PVC Recovery- Several Locations
  • RENEWABLE RESOURCES MR 6.0
    • Wilsonart 9%
  • LOW EMITTING MATERIALS IEQ 4.4
    • Contains no-added urea formaldehyde
  • REGIONAL PRIORITY CREDIT RP 1.0

*(W) Wilsonart, (F) Formica

For information on:
Link to Phenolic Core with ABS Specifications
Link to Phenolic Color Card

 

Information & Spec Library