High Pressure Laminate

Home | Toilet Partitions | Materials | High Pressure Laminate

AMPCO by AJW High Pressure Laminate compartment systems are the most popular specification, especially when a design requires flexibility, aesthetics, and economy.

AMPCO by AJW’s High Pressure Laminate components utilize NEMA GP-50 high-pressure laminate and industrial grade 45lb. density particleboard.  Bonding the edges before face lamination promotes water runoff, enhances color pattern aesthetics and inhibits deterioration.

AMPCO by AJW features a full range of solid designer colors, patterns and finishes.

Strengths

  • Economically priced
  • Quick ship availability
  • Large color selection
  • High graffiti resistance
  • Impact resistance

Construction Features:

  • 1-1/4” (31mm) thick pilasters
  • 7/8” nominal thick doors, panels and screens
  • Heavy duty cast chrome plated non-ferrous Zamac hinges and bracket hardware are standard
  • High Pressure Laminate bonded with structural water resistant adhesives
  • Edges bonded before face lamination
  • the following construction styles available for this material:  Overhead Braced (OHB), Floor Mounted (FM), Floor to Ceiling (F/C), Ceiling Hung (C/H), and Euroline.

Optional Features:

  • 1” minimum (25mm) thick finished doors, panels and screens
  • Plywood core, AB exterior grade
  • Stainless Steel finished laminate edges on doors, panels, stiles and screens
  • Steel core pilasters
  • Stainless Steel hardware
  • Continuous Aluminum or Stainless Steel wall brackets
  • Continuous Stainless Steel hinges
  • Continuous Aluminum Aluminum Spring Loaded Hinges
  • Euroline™ hardware
  • Non Added Urea Formaldehyde core
  • Surface mount chrome or stainless steel hinges (two or three per door)
  • No sightline Hardware (Cont. Aluminum Keepers and Cont. Hinges)

LEED:

  • RECYCLED CONTENT MR 4.0
  • Formica- Pre-consumer 71% Post-consumer 2%
  • Wilsonart- Pre-consumer 71% Post-consumer 5%
  • LOCAL AND REGIONAL MATERIALS MR 5.0 (Manufactured in all locations)
  • Laminate Recovery- Asheville, NC(W); Temple, TX(W); Bakersfield, CA(F); Atlanta, GA(F)
  • Particleboard Recovery- Adel, GA; Springfield, OH
  • Hardware Recovery- Comfort, TX
  • RENEWABLE RESOURCES MR 6.0
  • Wilsonart 2%
  • LOW EMITTING MATERIALS IEQ 4.4

*(W) Wilsonart, (F) Formica

 

For more information:
HPL Specifications

Quick 6 Program Available

High Pressure Laminate Color Card

Information & Spec Library